tire_services.jpg

Yamaha WR Suspension

wrGO RACE SUSPENSION!

  We have had amazing success with the WR Suspension Systems! Fortunately with our hard work endless testing and dedication on this suspension system we have very happy customers from all over the world!
This is a very good motorcycle, but the stock suspension is less than desirable. We have a proven solution!
Thank you for the opportunity to earn your business.

Yamaha WR 250 R and X suspension service quote;

The bike in stock form is sprung for a 170-190lbs rider with gear..

These spring rates are not set in stone and people may prefer stiffer or softer spring rates. Also you must consider add-on weight and or over size tanks.  Every pound matters!  Stock rates Are .47kg fork spring and as 7.7kg shock spring =/- 10%
If your Lighter or heavier we have spring options in stock!
If Your Short inseam is causing issue, we have suspension lowering options for both fork and shock. We can put your feet on the floor no matter what height you are.

Note; Stay away from lowering links; It screws up the leverage ratio and the bike will not preform as it could.

Labor: Forks and Shock Labor $375.00

Suspension full service/install parts custom revalve for both Forks and Shock.(Suspension off the bike)

Bring us the whole bike and add $75.00 for removal and reinstall of suspension.

Parts:

Shock shaft seal head assembly $70.00 KYB  part 46/14mm

“This part Must be replaced because the stock one is not in spec (The bushing in the stock seal head is a 12mm. The shaft bushing tolerance is on the loose side causing shaft deflection. The KYB seal head is a 15mm bushing and a tighter Shaft clearance. “Which means less shaft deflection..”

46mm Shock high flow base valve piston assembly $120.00

“This piston will provide a firm but compliant ride.”There are many reasons this part is changed, mainly quality product with Very tight tolerance to the body of the shock eliminates shock fade at high temperature.

Shock Nitrogen bladder adds 35cc fluid volume to shock. $25.00

(better cooling)

Shock Bump Rubber, increases bottom resistance. $25.00

FORK PARTS:
Fork base valve Assembly 20mm kit “My own creation” $140.00
Fork seals sets:

SKF  FORK SEAL 46MM LOWER FRICTION $70.00 PAIR

KYB OEM  FORK SEAL BLACK SEAL $45.00 PAIR

KYB OEM BUSHING KIT INNER AND OUTER $40.00

 SKF , they are very good in reducing friction and keeping the dirt out! http://www.skf.com/group/products/seals/index.html

Spring Prices: Rear EIBACH SHOCK $120.00

Special Collar kit for rear EIBACH Spring $30.00

Front fork springs CANNON RACECRAFT $120.00

Shop supplies- shims- KYB FORK SHOCK OIL- chemicals- Nitrogen-SS$30

We Use Only KYB o1M works suspension fluids.. The best in the world!

Shipping return with $900.00 insurance UPS (varies depending on location of return)
Total  around $800.00 +/- A FEW$ depends on a few part options

(springs add $265.00) Includes shock spring collars.

TOTAL FULL MONTY $1155.00 +/-  PARTS AND LABOR

Download Shipping Form Here

I can turn this around in just a few days. Everything is in stock!

Insure your suspension $900.00 minimal USP recommended.

Note: if you want more insurance , UPS will require a special form needed to fill out.
Thank you for the opportunity to earn your business!

Go Race Inc.

Travis Jones

Any questions please call 540-392-0696

email: suspension@go-race.com

Travis Jones
Go Race Inc.
1990 Palmer St
Christiansburg VA 24073
540-392-0696

www.go-race.com

 

© 2017 Go-Race. Powered by Wordpress.

site by cmgosselin